Enterasys X-Pedition XSR, Cli Reference Manual

Page: 19 / 684

General Network Management Commands
XSR CLI Reference Guide 1-5
help
This command retrieves help at any Mode.
Syntax
help
Mode
All
Example
XSR#help
ip http port
This command changes the HTTP (Hyper Text Transfer Protocol) port where incoming HTTP
(Web) sessions are connecting to.
Syntax
ip http port { port_number | default}
Mode
Global configuration:
XSR(config)#
Default
Port number: 80
Example
XSR(config)#ip http port 1234
ip http server
This command enables/disables HTTP (Web) service to the router. If the optional parameter is not
supplied, the HTTP server will be enabled. Since the HTTP server is disabled at boot ‐ up, you must
either manually enable it using the CLI or enable it in the
startup-config
file.
port_number
Incoming HTTP server port number from 1024 to 65535.
default
Sets the HTTP port to default.
Note: If you try to set the port-number but it is already in use (Telnet, e.g.) , it will be reset to the
default value automatically.