Enterasys X-Pedition XSR, Cli Reference Manual

Page: 130 / 684

Bootrom Monitor Mode Commands
3-124 Configuring the XSR Platform
dt
This command sets system time using the syntax
hh mm ss
. For example:
XSR:dt 11 59 59
ff
This command formats the Flash file system. We recommend you first save any
.dat
,
.cert
,
.cfg
,
and your
startup-config
files to
cflash:
or a PC since any files in
flash:
will be deleted. You
are prompted to enter data by the following script:
XSR-1800: ff
You will lose all files in the “flash:” file system.
Are you sure you want to format the “flash:” file system? (y/n) y
Unlocking flash file sectors
Initializing DOS file system.
Formatting flashrom file system
...................................................... Done.
Set working directory to flash:
Using default Bootrom password. The system is not secure!!!
Use “bp” to change password
XSR-1800:
ffc
This command formats the CompactFlash file system.
ng
This command retrieves a file over the network using a remote IP address and remote file path.
np
This command modifies network parameters. You are prompted to enter data by the following
script. While most of the options are self ‐ explanatory, three require further description.
• When set to no , the Autoboot option places the prompt in Bootrom mode when you boot or
power up the XSR.
• When set to yes , the default Quickboot action of delaying five seconds at startup for you to
optionally enter CTRL-C and acquire Bootrom mode is negated. You can still acquire Bootrom
mode, but you must immediately press CTRL-C upon seeing the X ‐ Pedition Security Router
Bootrom header.
• The default hostname (local target name), XSR ‐ 1800 , cannot be changed. In the absence of a
user ‐ supplied hostname via the hostname CLI command, this name will be used as the CLI
prompt and SNMP hostname in MIB ‐ II.
XSR-1800: np
Enter ‘.’ = clear a field; ‘-’ = go to previous field; ^C = quit
Local IP address (192.168.1.1) :
Gateway IP address () :