Enterasys X-Pedition XSR, Cli Reference Manual

Page: 518 / 684

Other ADSL Commands
13-92 Configuring ADSL
XSR(config-if<ATM0/1/0.1>)#crypto ezipsec
XSR(config-if<ATM0/1/0.1>)#crypto ipsec df-bit copy
XSR(config-if<ATM0/1/0.1>)#crypto map ets-vpn
description
This command adds a description string to an existing ATM sub ‐ interface. This command
requires a properly configured ATM sub ‐ interface.
Syntax
description description_text
Syntax of the “no” Form
The no form of this command sets the description text to an empty string:
no description
Mode
ATM Sub ‐ Interface configuration:
XSR(config-if<ATM xx.x >)#
Example
The following example adds the ADSL VC 1/32 text string to the sub ‐ interface object:
XSR(config-if<ATM0/1/0.1>)#description “ADSL VC 1/32”
encapsulation
This command selects the data encapsulation method for this ATM sub ‐ interface. Be aware that an
encapsulation method must be selected before the sub ‐ interface can pass data.
Syntax
encapsulation { mux | snap }{ ipoa | pppoa | pppoe } [ service - name ]
description
_text
A string describing the sub ‐ interface object. Text with embedded spaces must
be enclosed in double quotes. Omitting text causes an empty string.
Note: This command requires a properly configured ATM sub-interface. In order to change
encapsulation, you must issue the
no encapsulation
command first before restting the value.
mux
VC multiplexing (per RFC ‐ 2684/1483).
snap
LLC/SNAP multiplexing (per RFC ‐ 2684/1483).
ipoa
IP encapsulated traffic flows on this VC (per RFC ‐ 2684).
pppoa
PPP encapsulated traffic flows on this VC (per RFC ‐ 2364).
pppoe
PPP over Ethernet encapsulated traffic flows on this VC (per RFC ‐ 2516).