Enterasys X-Pedition XSR, Cli Reference Manual

Page: 288 / 684

BGP Configuration Commands
6-92 Configuring the Border Gateway Protocol
Defaults
• External: 20
• Internal: 200
Mode
Router configuration: XSR(config-router)#
Example
This example sets BGP external and internal administrative distances to 50 and 150, respectively:
XSR#config terminal
XSR(config)#router bgp 100
XSR(config-router)#distance bgp 50 150
neighbor advertisement-interval
This command sets the minimum interval that a router waits between sending BGP routing
updates to its neighbor. Before entering this command, a neighbor or peer group must be
identified by means of the neighbor remote ‐ as or neighbor peer ‐ group command. Configuring a
minimum interval of zero means that there is no delay in sending BGP routing updates to its
neighbor.
Syntax
neighbor { ip-address | peer-group-name } advertisement-interval seconds
Syntax of the “no” Form
The no form returns to the advertisement interval default:
no neighbor { ip-address | peer-group-name }
advertisement-interval seconds
Mode
Router configuration: XSR(config-router)#
Default
• External peers: 30 seconds
• Internal peers: 5 seconds
ip-address
Neighbor’s IP address.
peer-group-name
BGP peer group by name. Range: 1 to 64 characters.
seconds
Minimum interval, ranging from 0 to 600 seconds.