Enterasys Matrix E6 5G102-06-G, User Manual

Page: 101 / 196

Extended Bridge Configuration Screen
Device Control Menu Screens 7-29
Field Descriptions
Refer to Table 7-14 for a functional description of each screen field.
Table 7-14 Extended Bridge Configuration Screen Field Descriptions
Use this field... To...
Extended Multicast
Filtering Services See if the filtering of individual multicast addresses based on
Multicast Registration Protocol is active.
NOTE: This function is not available for the current
firmware release.
Traffic Classes See the mapping of user priorities to multiple traffic classes
function is active. (For configuration information, refer to
Section 7.10 .)
Static Entry Individual
Port See if the static filtering for unicast and multicast addresses
function is active. (For configuration information, refer to
Section 7.16 .)
Configurable PVID
Tagging Override the default PVID setting (Port VLAN ID used in frame
tags) and its egress status (VLAN-Tagged or Untagged) on each
port. For details, refer to
Section 7.15 .
Local VLAN Capable This switch does not support multiple local bridges (that is,
multiple Spanning Trees).
VLAN Learning Select the VLAN Learning mode (IVL or SVL) used by the switch.
IVL (Independent VLAN Mode) – Allows addresses to be
learned per VLAN.
SVL (Shared VLAN Mode) – Allows a single address for all
VLANs.
Auto VLAN Backplane
Configuration Enable or disable the ports on the backplane to support automatic
configuration of VLANs. The default is Enabled.
When set to Disabled, you must configure VLANs manually. For
information on how to configure VLANs manually, refer to
Section 7.15 .
Host VLAN ID Enter the Host VLAN ID and it is not limited to the default VLAN
(1).