Enterasys Matrix E6 5G102-06-G, User Manual

Page: 117 / 196

Static Unicast Address Table Configuration Screen
Device Control Menu Screens 7-45
Port
(Upper part of screen) See the port to which the host device is attached.
Status
(Upper part of screen) See the current Status of operation set for this static unicast
address. The status settings displayed include:
Permanent – Currently in use and will remain so after the
next reset of the switch.
DeleteOnReset – Currently in use and will remain so until
the next reset.
Lock Port – In port locking mode enabled.
Unlock Port – Port locking mode disabled.
Invalid – Corresponding entry removed from table.
DeleteOnTimeOut – Currently in use and will remain so
until it is aged out.
Other – Currently in use, but the conditions under which it
will remain, differ from the preceding values.
MAC
(Lower left side of screen) Enter the MAC address from which you want to begin
displaying data.
VID
(Lower right side of screen) Enter the VID which will be associated with the MAC
address entered in the MAC field to the left of this field.
MAC
(Lower right side of screen) Enter a MAC address to associate with the VID entered.
Port
(Lower right side of screen) Enter the Port number to be associated with the VID and
MAC address.
Table 7-22 Static Unicast Address Table Screen Field Descriptions (Continued)
Use this field... To...