Enterasys Matrix E6 5G102-06-G, User Manual

Page: 85 / 196

Spanning Tree Configuration Menu Screen
Device Control Menu Screens 7-13
Figure 7-6 STA Port Configuration Screen
Field Descriptions
Refer to Table 7-6 for a functional description of each screen field.
Table 7-6 STA Port Configuration Screen Field Descriptions
Use this field... To...
Fast forwarding mode
of all ports Enable or disable the forwarding of packets on all ports currently
displayed.
Type See 10/100TX, 100FX, 1000LX or 1000SX port.
Priority Define the priority for the use of a port in the STA algorithm. If the
path cost for all ports on a switch are the same, the port with the
highest priority (i.e., lowest value) will be configured as an active
link in the spanning tree. Where more than one port is assigned the
highest priority, the port with lowest numeric identifier will be
enabled. The default is 128.
The range is 0 - 255.
Spanning Tree Port Configuration :Port 1 - 12
Fast forwarding mode of all ports : [Enable] [Disable]
Port Type Priority Cost FastForwarding
---------------------------------------------------------------------------
1 10/100TX 128 100 ENABLED
2 10/100TX 128 10 ENABLED
3 10/100TX 128 10 ENABLED
4 10/100TX 128 10 ENABLED
5 10/100TX 128 10 ENABLED
6 10/100TX 128 10 ENABLED
7 10/100TX 128 10 ENABLED
8 10/100TX 128 10 ENABLED
9 10/100TX 128 10 ENABLED
10 10/100TX 128 10 ENABLED
11 10/100TX 128 10 ENABLED
12 10/100TX 128 10 ENABLED
<SAVE> <RETURN> <CANCEL> <PREV PAGE> <NEXT PAGE>
3583_26