Enterasys Matrix E6 5G102-06-G, User Manual

Page: 97 / 196

SmartTrunking Configuration Screen
Device Control Menu Screens 7-25
The ports used for each trunk must all be on the same internal switch chip, which is synonymous
with the SmartTrunk Group ID.
Table 7-12 identifies the ports associated with each group ID.
Table 7-11 SmartTrunking Configuration Screen Field Descriptions
Use this field... To...
SmartTrunk Group See the SmartTrunk Group number associated with the
logical ports listed under SmartTrunk Logical Port.
SmartTrunk Logical Port See the list of Logical Ports associated with the SmartTrunk
Group.
SmartTrunk Status Enable or disable the trunk group.
SmartTrunk Group Id Select from 1 to 6 trunks. This is the group ID of the
SmartTrunk group. Identifies the chip set to be used. Refer
to
Table 7-12 for the ports associated with each group ID.
Port Enter the number of the port that you want to add or remove
from the trunk. Refer to
Table 7-12 for the ports associated
with each group ID.
SmartTrunk Protocol Enable or disable the SmartTrunk Protocol on the selected
port.
NO CHANGE field Add or delete ports from group ID. Steps to ADD,
REMOVE, and NO CHANGE (default setting). This setting
causes the port selected in the Port field to be added,
deleted, or not changed when the SAVE command is used.
SAVE Save the current values on the screen.
SHOW Display the SmartTrunk group listed under the SmartTrunk
Group ID field.
Table 7-12 SmartTrunk, Ports Associated with Group IDs
Group IDs 1 2 3 4 5 6
Ports
1 thru 8 9 thru16 17 thru 24 25 thru 32 33 thru 40 41 thru 48