Enterasys Matrix E6 5G102-06-G, User Manual

Page: 60 / 196

Serial Port Configuration Screen
6-12 Management Setup Menu Screens
Field Descriptions
Refer to Table 6-6 for a functional description of each screen field.
Table 6-6 Serial Port Configuration Screen Field Descriptions
Use this field... To...
Management
Mode Set the console port setting for a direct console connection. The default is
CONSOLE MODE.
Baud rate Set the rate at which data is sent between devices. The default is 9600.
Options: 2400, 4800, 9600, and 19200 bps.
Data bits Set the data bits of the RS232 port. The default is 8 bits.
Options: 7, 8
Stop bits Set the stop bits of the RS232 port. The default is 1 bit.
Options: 1, 2
Parity Set the parity of the RS232 port. The default is NONE.
Options: none/odd/even
Time-Out
(in minutes) Set the time interval since the last input was received from the device
attached to the COM port, before the current session is automatically closed.
The default is 10.
Range: 0-100 minutes; 0: disabled
Auto Refresh
(in seconds) Set the interval before a console session will auto refresh the console
information, such as Spanning Tree Information, Port Configuration, Port
Statistics, and RMON Statistics. The default is 5.
Range: 5-255 seconds; 0: disabled