Enterasys Matrix E6 5G102-06-G, User Manual

Page: 111 / 196

802.1Q VLAN Static Table Configuration Screen
Device Control Menu Screens 7-39
7.14 802.1Q VLAN STATIC TABLE CONFIGURATION SCREEN
Screen Navigation Path
Password > Main Menu > Device Control Menu > 802.1Q VLAN Static Table Configuration
When to Use
To create a new VLAN or modify the settings for an existing VLAN. You can add/delete port
members of any VLAN in the switch. (Also, note that all ports can only belong to one untagged
VLAN. This is set to VLAN 1 by default, but can be changed via the 802.1Q VLAN Port
Configuration screen described in
Section 7.15 .)
Current Egress Ports See the ports that have been added to the displayed VLAN
group, where “1” indicates that a port is a member and “0”
that it is not. Each character represents a port, starting with
the left-most character representing the first port in a group.
For example, for port group 1 through 24, the left-most
character is the current egress for port 1 and the right-most
character is for port 24.
Current Untagged Ports See if a port has been added to the displayed VLAN (shown
Current Egress Ports field), its entry in this field will be “1”
if the port is untagged or “0” if tagged. As for the Current
Egress Ports field, the left-most character represents the first
port in a group and the right-most character the last port of
the group.
[Show] See the members of the VLAN indicated by the “Sorted by
VID” field.
[More] See if any subsequent VLANs have been configured.
NOTE: Under the screen field heading of Egress Ports, Forbidden Egress Ports, or
Tagged Ports, each number (1 or 0) represents a port. For example, next to 1 - 24 under
the Ports field heading, the leftmost number represents the port 1 and the rightmost
number represents port 24.
Table 7-19 802.1Q VLAN Current Table Information Screen Field Descriptions (Continued)
Use this field... To...