EnGenius EDS1130, User Manual

Page: 97 / 185

97
Chapter5 | User Interface
Note: If setting Event Duration to 20 seconds, the camera will keep recording for 20 seconds when an event is triggered. In this case,
if the Video Length is 20 seconds, then 1 file will be generated for instance of event. If Video Length per clipis 10 seconds, then 2
files will be generated event. Please note that pre-alarm and post-alarm will extend the length of the clip for the chosen extra length
of time.
Event Type: Record (movie clip) Event Settings
Storage Destination:
SD Card or Network Storage
Event Duration:
the length of time when an event is triggered
Pre-event: Enable or Disable pre-event
Pre-event Buffer: duration: the length of pre-event, 1~3 seconds
Post-event: Enable or Disable post-event
Post-event Buffer: the length of post-event, 1~3 seconds
Event Recording
Video Format: AVI is set
Stream Type: H.264 (1280x720) or H.264 (640x480). The options
may vary as it is the settings of current Stream 1 and Stream 2
Video Length: the maximum video length of time per file
Alarm Audio Play Settings
Play Audio: Enable or Disable the alarm audio through the speaker
when an event is triggered.
Alarm Audio Files: the sound file to be played when alarm is triggered.
Click
Play
to test.
Click Next to continue.