Proline Cubemass 300 Modbus RS485
Description of device parameters
Hauser
207
Factory setting
0 h
Additional information
Description
Once measured value logging has been started with the
Data log.control
parameter
(→ 207), the device does not save any data for the duration of the time delay entered.
Data log.control
Navigation
Expert → Diagnostics → Data logging → Data log.control (0857)
Prerequisite
In the
Data logging
Not overwriting
option is selected.
Description
Use this function to start and stop measured value logging.
Selection
• None
• start
• Stop
Factory setting
None
Additional information
Selection
• None
Initial measured value logging status.
• start
All the measured values recorded for all the channels are deleted and measured value
logging starts again.
• Stop
Measured value logging is stopped.
Data log. status
Navigation
Expert → Diagnostics → Data logging → Data log. status (0858)
Prerequisite
In the
Data logging
Not overwriting
option is selected.
Description
Displays the measured value logging status.
User interface
• Done
• Delay active
• Active
• Stopped
Factory setting
Done
Summary of Contents for Proline Cubemass 300
Page 2: ......
Page 294: ...www addresses endress com...