Endress+Hauser Proline Cubemass 300, Description Of Device Parameters

Page: 100 / 294

Description of device parameters Proline Cubemass 300 Modbus RS485
100 Hauser
Nominal diameter (2807) →  100
C0 to 5 (6022) →  101
Cal. factor
Navigation  Expert → Sensor → Calibration → Cal. factor (6025)
Description Displays the current calibration factor for the sensor.
User interface Signed floating-point number
Factory setting Depends on nominal diameter and calibration.
Zero point 
Navigation  Expert → Sensor → Calibration → Zero point (6195)
Description Use this function to enter the zero point correction value for the sensor.
User entry Signed floating-point number
Factory setting Depends on nominal diameter and calibration.
Nominal diameter
Navigation  Expert → Sensor → Calibration → Nominal diameter (2807)
Description Displays the nominal diameter of the sensor.
User interface DNxx / x"
Factory setting Depends on the size of the sensor
Additional information Description
The value is also specified on the sensor nameplate.