Endress+Hauser Proline Cubemass 300, Description Of Device Parameters

Page: 108 / 294

Description of device parameters Proline Cubemass 300 Modbus RS485
108 Hauser
Val.stat.inp.
Navigation  Expert → Input → Status input 1 to n → Val.stat.inp. (1353–1 to n)
Description Displays the current input signal level.
User interface • High
• Low
Active level 
Navigation  Expert → Input → Status input 1 to n → Active level (1351–1 to n)
Description Use this function to determine the input signal level at which the assigned function is
activated.
Selection • High
• Low
Factory setting High
Response time 
Navigation  Expert → Input → Status input 1 to n → Response time (1354–1 to n)
Description Use this function to enter the minimum time period for which the input signal level must
be present before the selected function is activated.
User entry 5 to 200 ms
Factory setting 50 ms
3.5 "Output" submenu
Navigation  Expert → Output
‣
Output
‣
Curr.output 1 to n →  109
‣
PFS output 1 to n →  124