Endress+Hauser Proline Cubemass 300, Description Of Device Parameters

Page: 178 / 294

Description of device parameters Proline Cubemass 300 Modbus RS485
178 Hauser
• Targ.corr.vol.fl
• Carr.corr.vol.fl
• GSV flow
• GSVa
• NSV flow
• NSVa
• S&W volume flow
• Oil mass flow
• Water mass flow
• Oil volume flow
• Water vol. flow
• Oil corr.vol.fl.
• Water corr.v.fl.
Factory setting Mass flow
Additional information Description
If the option selected is changed, the device resets the totalizer to 0.
Selection
If the Off option is selected, only Assign variable parameter (→  177) is still displayed
in the Totalizer 1 to n submenu. All other parameters in the submenu are hidden.
Unit totalizer 1 to n 
Navigation  Expert → Application → Totalizer 1 to n → Unit totalizer 1 to n (0915–1 to n)
Prerequisite One of the following options is selected in the Assign variable parameter (→  177) of
the Totalizer 1 to n submenu:
• Volume flow
• Mass flow
• Correct.vol.flow
• Target mass flow
*
• Carrier mass fl.
*
Description Use this function to select the process variable unit for the Totalizer 1 to n (→  177).
Selection SI units
• g
• kg
• t
US units
• oz
• lb
• STon
or
* Visibility depends on order options or device settings