Endress+Hauser Proline Cubemass 300, Description Of Device Parameters

Page: 88 / 294

Description of device parameters Proline Cubemass 300 Modbus RS485
88 Hauser
Selection • Off
• Fixed value
• External value
• Current input 1
*
• Current input 2
*
Factory setting Off
Additional information Selection
• Fixed value
A fixed pressure value is used for compensation: Pressure value parameter (→  88)
• Current input 1 option, Current input 2 option
The pressure value read in via the current input is used for compensation.
Pressure value 
Navigation  Expert → Sensor → External comp. → Pressure value (6059)
Prerequisite The Fixed value option is selected in the Pressure compen. parameter (→  87).
Description Use this function to enter a value for the process pressure that is used for pressure
correction.
User entry Positive floating-point number
Factory setting 0 bar
Additional information User entry
The unit is taken from the Pressure unit parameter (→  67)
External press.
Navigation  Expert → Sensor → External comp. → External press. (6209)
Prerequisite The External value option is selected in the Pressure compen. parameter (→  87).
Description Use this function to enter an external pressure value.
User entry Positive floating-point number
Factory setting 0 bar
Additional information User entry
The unit is taken from the Pressure unit parameter (→  67)
* Visibility depends on order options or device settings