Endress+Hauser Proline Cubemass 300, Description Of Device Parameters

Page: 133 / 294

Proline Cubemass 300 Modbus RS485 Description of device parameters
Hauser 133
• Target mass flow
*
• Carrier mass fl.
*
• Target vol. flow
• Carrier vol. fl.
• Targ.corr.vol.fl
• Carr.corr.vol.fl
• Density
• Ref.density
• Ref.dens.altern.
• GSV flow
• GSVa
• NSV flow
• NSVa
• S&W volume flow
• Water cut
• Oil density
• Water density
• Oil mass flow
• Water mass flow
• Oil volume flow
• Water vol. flow
• Oil corr.vol.fl.
• Water corr.v.fl.
• Concentration
*
• Temperature
• Carr. pipe temp.
*
• Electronic temp.
• Osc. freq. 0
• Osc. ampl. 0
*
• Freq. fluct. 0
• Osc. damping 0
• Osc.damp.fluct 0
• Signal asymmetry
• Exc. current 0
• HBSI
• Pressure
Factory setting Off
Min. freq. value 
Navigation  Expert → Output → PFS output 1 to n → Min. freq. value (0453–1 to n)
Prerequisite In the Operating mode parameter (→  126), the Frequency option is selected, and one
of the following options is selected in the Assign freq. parameter (→  132):
• Mass flow
• Volume flow
• Correct.vol.flow
• Target mass flow
*
• Carrier mass fl.
*
• Density
• Ref.density
• Concentration
*
* Visibility depends on order options or device settings