Endress+Hauser Proline Cubemass 300, Description Of Device Parameters

Page: 72 / 294

Description of device parameters Proline Cubemass 300 Modbus RS485
72 Hauser
Corr. vol. text 
Navigation  Expert → Sensor → System units → User-spec. units → Corr. vol. text (0592)
Description Use this function to enter a text for the user-specific unit of the corrected volume and
corrected volume flow. The corresponding time units (s, min, h, d) for mass flow are
generated automatically.
User entry Max. 10 characters such as letters, numbers or special characters (@, %, /)
Factory setting UserCrVol.
Additional information Result
The defined unit is shown as an option in the choose list of the following parameters:
• Cor.volflow unit parameter (→  64)
• Corr. vol. unit parameter (→  64)
Example
If the text GLAS is entered, the choose list of the Cor.volflow unit parameter (→  64)
shows the following options:
• GLAS/s
• GLAS/min
• GLAS/h
• GLAS/d
Corr vol. offset 
Navigation  Expert → Sensor → System units → User-spec. units → Corr vol. offset (0602)
Description Use this function to enter the offset for adapting the user-specific corrected volume unit
and corrected volume flow unit (without time).
Value in user-specific unit = (factor × value in base unit) + offset
User entry Signed floating-point number
Factory setting 0
Cor.vol. factor 
Navigation  Expert → Sensor → System units → User-spec. units → Cor.vol. factor (0590)
Description Use this function to enter a quantity factor (without time) for the user-specific corrected
volume unit and corrected volume flow unit.
User entry Signed floating-point number
Factory setting 1.0