Endress+Hauser Proline Cubemass 300, Description Of Device Parameters

Page: 177 / 294

Proline Cubemass 300 Modbus RS485 Description of device parameters
Hauser 177
Selection • Cancel
• Reset + totalize
Factory setting Cancel
Additional information Selection
Options Description
Cancel No action is executed and the user exits the parameter.
Reset + totalize Resets all totalizers to 0 and restarts the totaling process. This deletes all the flow
values previously totalized.
3.7.1 "Totalizer 1 to n" submenu
Navigation  Expert → Application → Totalizer 1 to n
‣
Totalizer 1 to n
Assign variable (0914–1 to n) →  177
Unit totalizer 1 to n (0915–1 to n) →  178
Operation mode (0908–1 to n) →  180
Control Tot. 1 to n (0912–1 to n) →  180
Preset value 1 to n (0913–1 to n)
→  181
Failure mode (0901–1 to n) →  182
Assign variable 
Navigation  Expert → Application → Totalizer 1 to n → Assign variable (0914–1 to n)
Description Use this function to select a process variable for the Totalizer 1 to n.
Selection • Off
• Mass flow
• Volume flow
• Correct.vol.flow
• Target mass flow
*
• Carrier mass fl.
*
• Target vol. flow
• Carrier vol. fl.
* Visibility depends on order options or device settings