ENCAD NovaCut 24, User Manual, Page: 96 / 228

NovaCut User's Guide
4-26 Setting Printing Options
When the coordinate axes have been rotated, the shaded area represents the
effective printing area on the basis of the specified L.L. and U.R. settings.
➪ ➪
➪ ➪
➪
To set the effective printing area
1 Press PAUSE to place the unit in Pause status.
2 Press NEXT DISPLAY.
<PRINT CUTTING>
<SEL. MODE SETUP>
3 Press Next DISPLAY until the menu below appears.
<ROTATE MIRROR>
<SCALE L.L./U.R.>
4 Press F4 (L.L./U.R.) to display the menu below for setting the lower left
point.
SET L.L. DEFAULT>
X= 0 Y = 0
Use the Position keys to move the pen carriage to the desired position. The
"X=" and "Y=" values respectively indicate the X- and Y-axis distances of
the pen carriage from the current origin. If you do not want to change the
current L.L. setting, press F3 (DEFAULT) to save the default L.L. setting
and display the menu shown in Step 5 for setting the upper right point. In
this case, there is no need to press Enter.
5 If a new L.L. point was specified in Step 4, press Enter to save it and
display the menu below.
SET U.R. DEFAULT>
X= 0 Y = 0