ENCAD NovaCut 24, User Manual, Page: 92 / 228

NovaCut User's Guide
4-22 Setting Printing Options
Enabling/disabling the printing of registration marks (R.MARK)
When this function is enabled, registration marks are automatically appended to
the print data. Registration marks are used for positioning print data in relation
to cutting data. For axis alignment, if raster data is printed after enabling the
R.MARK function, registration marks are printed around the raster data as
shown below. When the R.MARK function is enabled, the MARGIN function is
automatically set to Normal.
➪ ➪
➪ ➪ ➪
To enable/disable registration marks
1 Press PAUSE to place the unit in Pause status.
2 Press NEXT DISPLAY.
<PRINT CUTTING>
<SEL. MODE SETUP>
3 Press F1 (PRINT) to display the menu below. Change the current user
number if desired.
CURRENT USER =1
SELECT>