ENCAD NovaCut 24, User Manual, Page: 88 / 228

NovaCut User's Guide
4-18 Setting Printing Options
Selecting the status of pen parameter control (PEN CONT.)
This function selects whether the line width and pen color settings of individual
pen numbers are controlled by command input from the computer or by the
control panel settings. When the PEN CONT. setting is PANEL, the control
panel settings are valid and corresponding settings based on command input are
disregarded. When PEN CONT. is set to COMMAND, the line width and pen
color settings received by command input for individual pen numbers are valid.
➪ ➪
➪ ➪
➪
To select the status of pen parameter control (PEN
CONT.)
1 Press PAUSE to place the unit in Pause status.
2 Press NEXT DISPLAY.
<PRINT CUTTING>
<SEL. MODE SETUP>
3 Press F1 (PRINT) to display the menu below. Change the current user
number if desired.
CURRENT USER = 1
SELECT>
4 Press NEXT DISPLAY until the menu below appears.
TIME OUT>
<PEN COND. DRY TIME>
5 Press the F2 key (PEN COND).
<PALETTE PEN CONT.>
< PEN SET.