ENCAD NovaCut 24, User Manual, Page: 157 / 228

NovaCut is shipped with 4 MB of RAM and is upgradable to a maximum
of 68 MB, 32 MB per socket. If you are printing large HP-GL, HP-GL/
2, GP-GL, or GP-GL binary format images, you will need to purchase
and install additional memory.
Acceptable SIMM sizes
Printer memory may be upgraded by installing 72-pin SIMMs that are
either 32 or 36 bits wide. (The printer does not use parity bits.) The
SIMMs must not exceed a height of 2 inches (5 cm) and must conform
to JEDEC Std. 21-C, release 4.
The printer will accept 4 MB, 8 MB, 16 MB or 32 MB SIMMs.
The SIMMs in the following table have been tested and found to function
properly with NovaCut. Other manufacturer's SIMMs may be used if
they are within the height limitation and conform to JEDEC specifica-
tions; however, ENCAD does not guarantee compatibility. ENCAD's
bulletin board and Web page provide further information on SIMM
compatibility. You may want to check there for the latest information.
Vendor 4 Megabyte 8 Megabyte
Micron MT8D132M-6,-7 MT16D232M-6,-7
Samsung KMM5321200AW-6,-7 -
Siemens - HYM322140S60,70
Toshiba THM3210B0ASG-60,-70 THM3220C0ASG-60,-70
16 Megabyte 32 Megabyte
Micron MT8D432M-6,-7 MT16D832M-6,-7
Samsung KMM5324100AK-6,-7 KMM5328100AK-6
Note : ENCAD printers do not use parity. Either 32-bit or 36-bit
wide SIMMs may be used.
Installing additional memory B
APPENDICES