Emerson Rosemount OCX 8800, Instruction Manual

Page: 185 / 306

Instruction Manual
IM-106-880C, OI
Section 7: Foundation
Fieldbus
April 2017
Input Selector (ISEL) Function
Block
15
9
DISABLE_2 16 None A Connection from another block that disables the associated input fromthe
selection.
DISABLE_3 17 None A Connection from another block that disables the associated input fromthe
selection.
DISABLE_4 18 None A Connection from another block that disables the associated input fromthe
selection.
GRANT_DENY 9 None Options for controlling access of host computers and local control panels to
operating, tuning, and alarm parameters of the block. Not used by device.
IN_1 11 Determinedby
source
IN_2 12 Determinedby
source
IN_3 13 Determinedby
source
IN_4 14 Determinedby
source
The connection input from another block. One of the inputs to be selected
from.
The connection input from another block. One of the inputs to be selected
from.
The connection input from another block. One of the inputs to be selected
from.
The connection input from another block. One of the inputs to be selected
from.
MIN_GOOD 20 None The minimum number of good inputs The actual, target, permitted, and
normal modes of the block. Target: The mode to “go to” Actual: The mode the
“block is currently in” Permitted: Allow ed modes that target may take on
Normal: Most common mode for target.
OP_SELECT 22 None Overrides the algorithm to select 1 of the 4 inputs regardless of the selection
type.
OUT 7 EU of IN The block output value and status.
OUT_UNITS 8 None The engineering units of the output. Typically, all inputs have the same units
and the value is also the same.
SELECTED 21 None The selected input number (1–4).
SELECT_TYPE 19 None Specifies selection method (see Block Execution).
STATUS_OPTS 10 None Allows selection of options for status handling and processing. The supported
status option for the PID block is Target to Manual if Bad IN.
STRATEGY 3 None The strategy field can be used to identify grouping of blocks. This data is not
checked or processed by the block.
1 None The revision level of the static data associated w ith the function block. The
revision value w ill be incremented each time a static parameter value in the
block is changed.
TAG_DESC 2 None The user description of the intended application of the block.
23 None This alert is generated by any change to the static data.
Index
Number
Units Description