Emerson Rosemount CT5100 Ex, Quick Start Manual

Page: 54 / 86

Figure 4-8: Purge Control Panel
4.4.2 Gas sensor main screen
When the analyzer is switched on, at the end of the start-up procedure, the Gas Sensor
Main screen ( Figure 4-9 ) appears. The Gas Sensor Main screen is the screen that is normally
displayed.
NOTICE
The gas concentrations shown in the following screenshots may be different from those
shown in your particular analyzer. They indicate the functionality of the software, which is
the same regardless of the gases or gas concentrations being measured.
Figure 4-9: Gas Sensor Main Screen
The Gas Sensor Main screen displays the gas concentration measurements obtained by the
analyzer. In the example shown in ( Figure 4-9 ) the gases nitric oxide (NO), nitrogen dioxide
(NO
2
), oxygen (O
2
), carbon monoxide (CO), and carbon dioxide (CO
2
) are being measured,
Start-up procedure Quick Start Guide
August 2018 D-7010-0055
54 Rosemount
™
CT5100 Ex