Emerson Micro Motion LNG Series, Configuration And Use Manual

Page: 52 / 100

Options Description
OUT x ≤ A or x ≥ B
The event occurs when the value of the assigned process variable ( x ) is
out of range, that is, less than
Setpoint A
or greater than
Setpoint B
, end-
points included.
3. Assign a process variable to the event.
4. Set values for the required setpoints.
• For HI and LO events, set
Setpoint A
.
• For IN and OUT events, set Setpoint A and Setpoint B .
5. (Optional) Configure a discrete output to switch states in response to the event
status.
Options for Enhanced Event Action
Options for Enhanced Event Action Table 6-1:
Action ProLink III
None (default)
None
Start sensor zero
Start Sensor Zero
Start/stop all totalizers Start/Stop All Totalization
Reset mass total
Reset Mass Total
Reset volume total
Reset Volume Total
Reset gas standard volume total Reset Gas Std Volume Total
Reset all totals
Reset All Totals
6.2 Configure digital communications
The digital communications parameters control how the transmitter will communicate
using digital communications.
Your transmitter supports the following types of digital communications:
• Modbus RTU via the service port
• Modbus RTU via the RS-485 port
Note
The service port responds automatically to a wide range of connection requests. It is not
configurable.
Integrate the meter with the control system
46 Micro Motion ® LNG Series Meters