Emerson Micro Motion LNG Series, Configuration And Use Manual

Page: 32 / 100

4.3.3 Configure
Gas Standard Volume Flow Measurement Unit
ProLink III Device Tools > Configuration > Process Measurement > Flow
Overview
Gas Standard Volume Flow Measurement Unit specifies the unit of measure that will be displayed
for the gas standard volume flow rate. The measurement unit used for the gas standard
volume total and the gas standard volume inventory is derived from this unit.
Prerequisites
Before you configure Gas Standard Volume Flow Measurement Unit , be sure that Volume Flow Type
is set to Gas Standard Volume .
Procedure
Set Gas Standard Volume Flow Measurement Unit to the unit you want to use.
The default setting for Gas Standard Volume Flow Measurement Unit is SCFM (Standard Cubic
Feet per Minute).
Tip
If the measurement unit you want to use is not available, you can define a special measurement unit.
Options for
Gas Standard Volume Flow Measurement Unit
The transmitter provides a standard set of measurement units for Gas Standard Volume Flow
Measurement Unit , plus one user-defined special measurement unit. Different
communications tools may use different labels for the units.
Options for Gas Standard Volume Measurement Unit Table 4-3:
Unit description ProLink III label
Normal cubic meters per second
Nm3/sec
Normal cubic meters per minute Nm3/sec
Normal cubic meters per hour
Nm3/hr
Normal cubic meters per day
Nm3/day
Normal liter per second NLPS
Normal liter per minute
NLPM
Normal liter per hour
NLPH
Normal liter per day NLPD
Standard cubic feet per second
SCFS
Standard cubic feet per minute SCFM
Configure process measurement
26 Micro Motion ® LNG Series Meters