Emerson Micro Motion LNG Series, Configuration And Use Manual

Page: 21 / 100

3 Introduction to configuration and
commissioning
Topics covered in this chapter:
• Default values and ranges
• Disable write‐protection on the transmitter configuration
• Restore the factory configuration
3.1 Default values and ranges
See Default values and ranges to view the default values and ranges for the most commonly
used parameters.
3.2 Disable write-protection on the transmitter
configuration
ProLink III Device Tools > Configuration > Write-Protection
Overview
If the transmitter is write-protected, the configuration is locked and you must unlock it
before you can change any configuration parameters. By default, the transmitter is not
write-protected.
Tip
Write-protecting the transmitter prevents accidental changes to configuration. It does not prevent
normal operational use. You can always disable write-protection, perform any required configuration
changes, then re-enable write-protection.
3.3 Restore the factory configuration
ProLink III
Device Tools
>
Configuration Transfer
>
Restore Factory Configuration
Overview
Restoring the factory configuration returns the transmitter to a known operational
configuration. This may be useful if you experience problems during configuration.
Introduction to configuration and commissioning
Configuration and Use Manual 15