Emerson E2, Installation And Operation Manual

Page: 232 / 283

C-6
•
E2 RX/BX/CX I&O Manual 026-1614 Rev 4 5-JAN-2013
External Fault 30 An external fault input defined in a Multiflex PAK
controller has indicated a failure. External fault
inputs in the PAK are used to detect a Rack (Pack)
failure produced by some device out of the PAK's
control.
Failed Attempt To Bind Input 50 A valid link could not be made between an E2 appli-
cation and an input assigned to it.
Failed Sensor Or Bad Wiring 20 E2 is unable to get a valid sensor value due to a possi-
ble hardware problem.
Failed To Create logging 20 E2 is unable to create logs for the input or output
shown.
Failed to Obtain DHCP Lease 20 Failed to obtain a DHCP lease from the DHCP
Server, when a lease is requested. This happens at
system startup, if a DHCP lease is requested, or if the
user switches to using DHCP.
Failed to Renew DHCP Lease 20 DHCP Lease failed to renew altogether. DHCP
Leases are renewed at an interval of half the time of
the requested lease. If the lease is for 5 days, then a
renewal will happen at 2.5 days. If this fails, it will
retry at the ¾ of the lease time. If both attempts fail,
the alarm is generated.
Fax Init String Is Not Valid 30 The fax initialization string for the E2’s modem is
incorrect and may need editing.
Features denied during restore 99 License manager has denied permission to access a
feature during a restore. Either the license for that
feature is invalid or it does not exist, or the number of
licenses for that feature is less than the number
needed for the configuration. Further information
may be found in the service log.
Features denied during startup 99 License manager denied permission to access a fea-
ture during startup. Either the license for that feature
is invalid or it does not exist, or the number of
licenses for that feature is less than the number
needed for the configuration. Further information
may be found in the service log.
File Not Found 50 An internal error has occurred in the E2.
Firmware File Bad - AI200 15 A 16AIe has corrupted firmware.
Firmware File Bad - RO200 15 An 8ROe has corrupted firmware.
Firmware File Bad - CC100 Liq 15 A CC-100P or CC-100LS has corrupted firmware.
Firmware File Bad - CC100 Suct 15 A CC-100H has corrupted firmware.
Firmware File Bad - CS100 Ckt 15 A CS-100 has corrupted firmware.
Firmware File Bad - ESR8 15 An ESR8 has corrupted firmware.
Firmware File Bad - RT100 15 An RT-100 has corrupted firmware.
Alarm Name
Default
Priority
Definition