Hardness Tester
Introduction
DuraJet 10 G5
1-3
1.3
Manufacturer's notes
The rating plate sits at the right-hand side on the base. It shows the information that is
required to identify the machine.
1
Manufacturer information
2
Type name
3
Serial number
4
Mains voltage
5
Nominal motor voltage
6
External fuse
7
Number of the circuit diagram
8
Disposal information
9
CE sign
10 Year of manufacture
Address
EMCOTEST Prüfmaschinen GmbH
Kellau 174
5431 Kuchl
Austria
Phone
+43 6244 20438
Fax
+43 6244 20438-8
Internet
www.emcotest.com
The machine is intended to be used to test hardness in accordance with the following
methods:
Metals, plastic material and carbon material
▪
Rockwell EN ISO 6508, ASTM E18
▪
Plastics EN ISO 2039-1
▪
Brinell and Vickers, depth hardness only, not standardized
▪
Testing carbon material DIN 51917
Conversion standards: DIN EN 50150, EN ISO 18265, ASTM E140-05.
Testing other material is not permitted or, in exceptional cases, only after agreement
with your contact person. Never use poisonous or harmful materials. Intended use also
includes observing the specified operating and maintenance instructions.
The machine must be installed in a clean location. It is particularly important that this
location is free of metal chips, dust, smoke and other contaminants. If the ambient air at
Rating plate
Manufacturer
information
Intended use
