Hardness Tester
Startup and Retooling with
Optional Accessories
DuraJet 10
7-8
Remove the cover with the fuses.
Carefully remove both fuses from their holders.
Insert the replacement fuses provided into the fuse holders.
Insert the fuses in their holders back into the machine.
Install the fuses in the reverse sequence of the removal.
Ensure that the two fuse clips are slightly pressed together when you insert them into
the housing.
Plug the power cable into the mains connection.
Turn the main switch to ON.
7.5
Replacing the Test Anvil
You can remove the DM 90mm XY table provided. The 25-mm bore can then be used to
accommodate other test anvils and sample supports. The 4 M6 bores are used to
secure special accessories.
Raise the test anvil provided and remove it from the machine.
Removing the test anvil
