Hardness Tester
Startup and Retooling with
Optional Accessories
DuraJet 10
7-6
WARNING
Risk of injuries
If the DuraJet unit is controlled via an external machine control system, a safety compliance
assessment in accordance with the Machinery Directive 2006/42/EC must be made. Please
contact the manufacturer if you have any questions.
7.3
Foot button
This option is used to clamp a work piece via a foot switch when components are
extremely large and there is a risk of injury in the area of the two-hand control.
To be able to use the foot switch, the option "External machine control via hardware
interface" must be installed in the machine. For this option the DuraJet G5 is equipped
with an additional interface at the rear of the machine stand. The foot switch can be
connected via this interface.
The foot switch is equipped with a safety locking device. The safety circuit is interrupted
when the switch is fully depressed. In order to re-activate the safety circuit, the black
unlocking switch at the upper side of the foot switch must be turned anticlockwise. If the
foot switch option is ordered, the scope of supply includes the foot switch and 2.5 m
connection cable.
7.4
Replacing the Fuses
DANGER
Electric current
Only trained personnel are permitted to replace fuses.
Switch off the machine at the main switch before you replace a fuse.
Pull the mains plug before you start any maintenance work.
