Hardness Tester
Introduction
DuraJet 10 G5
1-1
1 Introduction
1.1
Preface
Our hardness testing machines represent state-of-the-art technology and comply with
current norms and standards. Both the hardware and software in our machines can be
upgraded on an ongoing basis. As a result, you can ensure that the technology in your
machine is always up-to-date.
The machines are equipped with a measuring system and electronic power control.
They are also distinguished by their ergonomic design and user-friendly software, which
complies with DIN standards.
Take your time to read this instruction manual thoroughly. You will be amazed by the
many application options available.
1.2
Safety notes
Familiarity with the applicable safety regulations is a prerequisite for safe, error-free
operation of this machine.
Refer to the instructions in this manual, and, in particular, to the safety instructions,
when operating the machine. It is also essential that you observe all rules and
regulations for accident prevention that apply in the location where the machine is
operated.
The design of this machine and its equipment is state-of-the-art and complies with
recognized safety regulations. Nevertheless, risk of injury or death to the user or third
parties may arise in certain cases, and the machine or other property may be damaged.
Icons are used to highlight these risks in the relevant chapters.
Read all operating instructions before you start the machine.
Keep the operating instructions in the vicinity of the machine. Order a new copy if you
lose it.
To avoid personal injury while moving the machine, never try to move it unassisted. The
machine's weight is approximately 110 kg.
Remove all transportation safety devices before starting the machine.
▪
Position the machine on a secure and stable working surface.
▪
Ensure that its working height is in accordance with ergonomic principles and will
not result in unnecessary physical strain.
▪
Ensure that there is sufficient space available to access the machine and that an
adequate escape route is kept clear to provide for unforeseen incidents.
▪
Ensure that the work station has adequate lighting.
▪
The hardness testing machine must be protected against shocks and vibrations that
can influence the test result.
Please bear in mind that the machine must not be used in explosive environments.
Ensure that workwear is close-fitting and cannot become entangled in the machine's
moving parts. Make sure you use your personal protective equipment.
The machine must be connected to a grounded electrical outlet (a protective conductor
contact is required).
Safety regulations
Operating instructions
Moving the machine
Transportation safety
devices
Installation
Fire and explosion
protection
Workwear and
protective equipment
Electrical power supply
