Hardness Tester
Messages and Problems
DuraJet 10
8-5
replace the indenter, refer to "Initial
Startup" on page 2-9.
Entered Value outside Allowed
Range!
Change the value.
Timeout, Indenter has not
Touched Sample in Time!
Before you start testing, move the test unit
down for the next measurement.
Timeout, Target Force not
Reached in Time!
Take the measurement again. If the same
message appears, contact your supplier.
Preset Position not Reached!
The precise unclamp distance was not
reached. If the same message appears,
contact your supplier.
USB Flash Disk not Available or
Full!
Check that the USB flash disk (USB stick)
is compatible.
If necessary, check the USB flash disk on
a PC to determine whether it is full.
Error Occured, Print Process
Canceled!
Check that a printer is correctly connected.
Message
What to do
Caution! Warning! Indenter has
touched Surface. Move up Test
Unit.
Use the
Nose Cone Up
button on the
control unit to move the test unit up.
Upper Position reached. Move
Down Test Unit.
Use the
Nose Cone Down
button on the
control unit to move the test unit down.
No Results in Measurement List.
Data Export not possible!
Proceed with testing.
Template Name is already
existing. Please enter a new
Template Name!
Select
OK
to access the screen where you
can assign a new template name or
change an existing template name.
File is already existing. Do
you want to overwrite the File?
Change the file name or choose
OK
to
confirm.
Caution! Warning! The Hardn.
Minimum Value is greater or
equal than the Hardn. Maximum
Value.
Change the values.
Please Connect USB Flash Disk
on the Back of the Machine.
Insert a USB flash disk (USB stick) into the
USB port provided.
No Printer Connected, or
Printer not available!
Check that a printer is correctly connected
and is ready for use.
Error Occured! Detailed
Information in the Error List!
The error list is described under
"Messages and Problems" on page 8-1.
Logo was Successfully Loaded!
The company logo was downloaded and
will be inserted into the correct position in
the test report (see "Report", page 5-6).
Self-explanatory
service messages