EMC-PARTNER EXTTRA3000 E, User Manual

Page: 32 / 162

TRANSIENT3000
32/162
2.3 Precautionary measure during use
The TRA3000 F-S-D-V-C generates high voltages. The energy content of the SURGE impulse is high and
can be dangerous with improper use. It is wise to observe the following rules:
•
Never touch the EUT when a test is in operation.
•
Touch no connectors of interconnection cable when a EMC test is in operation.
•
The high voltage of the TRA3000 F-S-D-V-C and the power on the EUT must be turned off before a
manipulation on the EUT is carried out.
•
For all services, e.g. check of the fuses, the power cord must first be unplugged.
The TRA3000 F-S-D-V-C must be connected to power line with a safety ground. If an isolation transformer
is involved in TRANSIENT supply the secondary side of the isolating transformer must be grounded.
2.4 Electromagnetic Compatibility
The outputs of the TRA3000 F-S-D-V-C and the links between TRA3000 F-S-D-V-C and the EUT can emit
disturbances. Please consider the national PTT rules.
The Test System TRA3000 F-S-D-V-C should not be operated near sensitive measuring and control
systems.
The TRA3000 F-S-D-V-C fulfils the following immunity requirements:
•
Electrostatic discharge
Level 4 (8 kV) (IEC 61000-4-2)
•
Burst EFT
Level 4 (4 kV) (IEC 61000-4-4)
•
SURGE
Level 3 (2 kV) (IEC 61000-4-5)
2.5 The manual is an integral part of the equipment. Refer to the manual.
This manual is an integral part of the TRA3000 F-S-D-V-C. The safety rules and precautions in the
manual must be observed. EMC PARTNER and their representatives are not responsible for damage
to persons and equipment by not observance of safety rules and precautions in the manual.