EMC-PARTNER EXTTRA3000 E, User Manual

Page: 125 / 162

E-TRA3000 F-S-D-V-C_E-Manual 125/162
12 Remote Ports
12.1 General
12.1.1 Ethernet port setting on TRA3000
The following steps must be carried out on TRA3000 to remote control from a local PC
Press "Main" - three time "Menu" - "Eth."
display when "Main" has been
pressed display after pressing thee time
Menu after pressing "Eth." soft key
Set the Local IP to the TERA 3000 IP Address, example 192. 168. 0.140
12.1.2 IP address setting on PC
The following steps must be carried out to control the TRA3000 from a local PC
Open the network windows as shown below:
Select the internet protocol Set the PC IP address to 192. 168. 0.100
Connect with Ethernet cable type (crosswire) delivered with the TRA3000 standard accessories the PC to
the TRA3000.
When the GENECS is installed on the PC, then the TRA3000 can be remote controlled from the PC.
For Web server access, start your web browser (internet explorer, Morzilla, Firefox,…) and write the
TRA3000 IP address. Example: htpp:/192.168.0.140