EMC-PARTNER EXTTRA3000 E, User Manual

Page: 37 / 162

E-TRA3000 F-S-D-V-C_E-Manual 37/162
3 Mechanical structure
3.1 General
The TRA3000 F-S-D-V-C is ideal for running tests in development/test laboratory environments and for
outdoor service on larger systems. For outdoor service, the TRA3000 F-S-D-V-C can be fitted into a military
case.
For better understanding, the TRA3000 F-S-D-V-C will be divided into two parts:
•
The left hand part of the TRA3000 F-S-D-V-C contain the control and measurements. The left hand side
of the front panel, is called the control panel.
•
The right hand part contains all high voltage circuits, such us high voltage source, high voltage switches,
the impulse-forming network and the coupling / de-coupling network. This part is called the operation
panel.
Fig.3.1
The power connections of the TRA3000 F-S-D-V-C and the EUT are located on the rear panel. With the
EUT power inputs on the rear side and the outputs on the front side an optimum de-coupling is guaranteed.
This arrangement allows test set-up without parallel-running cables.
The TRA3000 F-S-D-V-C is available with different options:
Standard with handles on both side as showed in Figure 3.1. This version is recommended for use in
development and EMC test laboratories.
19“ insert version . The handles are removed and angle brackets are fixed on both sides for fitting the
TRA3000 F-S-D-V-C in a 19“ rack. When the TRA3000 is equipped with an EFT circuit the EFT output
must be maximum 50 cm above the reference ground plane.
Standard with handle in a military case
. This version is recommended for outdoor EMC testing.