KOMET 200 - 600
Table of opening angels KOMET 600depending on measurements A and
B.
Opening angle
A / B *
A / B *
90°
225 / 225
240 / 240
95°
225 / 210
240 / 225
100°
225 / 195
240 / 210
105°
225 / 180
240 / 195
110°
240 / 180
-
115°
240 / 165
-
120°
240 / 150
-
Table 5 - (*All measurements are quoted in millimetre.)
The measurement E for KOMET 200 / KOMET 280 / KOMET 400 is
1,010mm each, for the KOMET 600 it is 1,245mm. To exceed these
measurements may result in a disruption of operation. To go below
these measurements, reduces the opening angle.
Please strictly observe the approved measurements. This is necessary
for an optimal operation. In case these measurements cannot be
observed, please send us your dimensional drawing for checking.
External stops for gate OPEN and gate CLOSED are mandatory for the
gate openers KOMET200, KOMET 400, and KOMET 600.
8.2
Installation dimensions (elevation)
Drawing6
1
Mounting support P
2
Mounting support T 24mm higher than mounting support P
Please make sure, that the gate wings can be moved easily and that the axis
of rotation is in a completely vertical position. Check that there is enough room
for the opener behind the opened gate.
17