KOMET 200 - 600
13
With the
button LERN
the selected point can be activated. The present value
for force (F = force) or speed (S = speed) is displayed. Possible values are
01
(for minimum force) up to
99
(for maximum force) or
01
(for minimum
speed) up to
08
(for maximum speed). With
button LERN
the values may be
increased, with the
button BTG
they can be decreased. Return to the learning
sequence using button LERN.
ATTENTION!
The maximum force (F1 - F4) has to be adjusted according to
the relevant gate opener using the learning sequence. If a force higher than
shown below is adjusted, the motor will not be able to reverse on obstacle.
Swing gate opener
Adjustment range
KOMET 200/202
F1 – F4 = max. 35
KOMET 280/282
F1 – F4 = max. 35
KOMET 400/402
F1 – F4 = max. 45
KOMET 600/602
F1 – F4 = max. 55
Table 14
10.3.1.3
Sequence P3: Time lag of the pedestrian wing (closing)
When sequence
P3
is activated by
button LERN
, the present value for the
time lag of the pedestrian wing during closing is displayed. Possible values are
00
(for 0s) up to
09
(for 9s). The value can be
increased using button BT
and
decreased using button BTG
. Return to the learning sequence using
button LERN.
Remark:
When a time lag is selected for gates with one wing, it will not be in
effect.
10.3.1.4
Sequence P4: Time lag of the main wing (opening)
When sequence
P4
is activated by
button LERN
, the present value for the
time lag of the pedestrian wing during closing is displayed. Possible values are
00
(for 0s) up to
09
(for 9s). The value can
be increased using button BT
and
decreased using button BTG
.
Return to the learning sequence using
button LERN
.
Remark:
When a time lag is selected for gates with one wing, it will not be in
effect.
10.3.1.5
Sequence P5: Learning and deleting of code for radio remote control
To learn a code the transmitter has to be operated. The code will then be
stored. When sequence
P5
is activated with the
button LERN
, an additional
selection menu is displayed for selecting the code.
Move to the next point
using button BT.
Sub-sequence Function
c1
Radio remote control code for BT can be learned or deleted
c2
Radio remote control code for BTG can be learned or
deleted
30
