Elk BAPPU-evo, Compact Manual

Page: 38 / 51

BAPPU- evo Multi-measuring device for workplace analysis
10.6. Operating and reading the internal data counter
Data Logger port
To configure or read the BAPPU-evo internal data counter
(which will be referred to as “counter”), the correct port has to
be selected and the BAPPU-evo should be selected as the
device of choice.
This can be achieved by selecting “Logger-Comport” in the
menu list. Select BAPPU-evo, as shown in the diagram on
the left.
Configuring the data logger
The configuration window, which is to be found in the main
window, is used for entering the settings for the measurement
specifications and the configuration data. To open the
window, select “Logger/Configure Logger” in the menu list.
The “Connect Logger” button is for checking the ports (an automatic system
connection process is carried out by the system every ten seconds). When a counter
(BAPPU-evo) has been found, its serial number is shown in the dialog box below the
time setting button.
page 36
comp a c t manual
status 07/2019