Elk BAPPU-evo, Compact Manual

Page: 20 / 51

BAPPU- evo Multi-measuring device for workplace analysis
4.3. Settings
All settings, such as language, display and energy functionality, profile settings, to
name but a few can be carried out here (please refer to page 25, chapter 8
„Settings“).
5. Recording preparation
5.1. Modifying the measurement profile (Profile)
The measurement sequence profile is where you can define which measuring
ranges are available in the measurement sequence. Two profiles, namely “All” (all
measuring ranges) and “Standard”, are available. However, the user can set up eight
additional user-defined profiles. The default setting is that all measuring areas are
activated for all profiles. You can customise the profiles in accordance with your
needs.
Tip: Tip:
Measuring ranges
from external sensors,
which are not connected,
do not appear in the
measurement sequence,
even in cases when they
are activated.
In order to be able to edit additional profiles, select
“Settings” in the main menu and select “Profile”.
Confirm the selection by pressing
. Profile “01 ALL”
is permanently assigned and contains all measuring
ranges.
All other profiles can be changed according to your
requirements. Simply select the profile you wish to
change and then press . You can use the and cursor buttons to
navigate the measuring ranges.
You can use to select or deselect a specific measuring range. Alternatively, you
can make the selection using the touch screen.
The measurement sequence profiles can be managed using “BAPPU-Standard”
software (please refer to page 33, chapter 9.11, „Measurement profile (Profile)“).
page 18
comp a c t manual
status 07/2019