Multi-measuring device for workplace analysis
BAPPU-
evo
The coloured blocks making up the value bar represent the areas where the “Traffic-
light” function for conformity control is indicated. You can use the mouse to move the
coloured blocks to the values where you would like to set the threshold values for the
respective measurement range. The values are then shown as numbers in the fields.
The edited threshold values are also displayed in colour in the top right-hand field. The
threshold values can also be entered here.
The set values, which will be indicated by BAPPU as the desired values of the
selected measurement range of the work place, can be entered in the “Set value of the
display (Target)” input field.
To display the PMV type definitions as well as the necessary clothing values and the
Physical Activity Levels for the PMV calculation, click the “Adjusted (PMV)” button that
can be found at the bottom of the window. The existing records represent the
intermediate values for VDU work places and, as a rule, must not be changed.
Tip
Tip
: In cases where no recording is to be made in a
measurement range, the user should enter “0” in the set
value of the display input field. BAPPU-evo will not show a
set value for this measurement range (“NONE”) and will
not carry out a conformity control check with this
measurement range.
page 31
status 07/2019
Summary of Contents for BAPPU-evo
Page 1: ......
Page 2: ...EN The original operating manual is in German Status 08 2019...
Page 51: ......