Elk BAPPU-evo, Compact Manual

Page: 10 / 51

BAPPU- evo Multi-measuring device for workplace analysis
1.12. Disposal
Please dispose of all packaging and obsolete devices in
the correct manner. In the interest of the environment, the
device must not be thrown away as normal household
waste. You should arrange for the proper disposal of the
device.
Your local government will be able to provide you with the
respective collection points and their opening hours.
1.13. Support
ELK GmbH | Gladbacher Straße 232 | D-47805 Krefeld
Fon: +49 (0) 2151 392829 | Fax: +49 (0) 2151 391846 I
info@bappu.de | www.bappu.de
1.14. Calibrating BAPPU-evo
Detectors and sensors are prone to drifting and change. In order to guarantee high-
quality results with BAPPU-evo, we recommend that a factory calibration of the unit
should be carried out every twelve months.
BAPPU-evo displays a corresponding message in the main menu one month before
the end of the calibration interval. This can be deactivated under "Settings / Display".
However, it is then possible that the results of the measurements are outside the
tolerance range.
1.15. Technical data and measuring range
Permissible operating conditions
Temperature: range from -10 °C to +50 °C I Relative humidity: range from 0 to 95%
(non-condensing) I The optional sensors might have deviating operating conditions:
With the optional CO sensor (only in BAPPU-VOCOO to serial number xxx/05):
temperature: range from -0 °C to +50 °C (this also applies for storage)
Caution : Storage below 0 ° C can permanently damage the
CO sensor.
With option particular matter (in BAPPU-VOCOO-sx):
temperature: from -0 °C to +40 °C (this also applies to storage)
page 8
comp a c t manual
status 07/2019