Elk BAPPU-evo, Compact Manual

Page: 22 / 51

BAPPU- evo Multi-measuring device for workplace analysis
Deleting measurement data
It is possible to delete data from either the current work place or alternatively of all
work places.
Tip: Tip:
Measurement data of the currently displayed
workplace can also be deleted via the measurement
result overview.
If you have edited the workstation as desired, select "Back" (F1) to go to the list view
to configure further workstations or to start a BAPPU measurement series.
6. Measurement sequen
6.1. Perform measurement
In order to carry out the measurement sequence,
select the work place from the work place list. To
start measuring, press
. According to the
profile selected, you will now start your first
measurement. By default, this will be the
measurement of the air temperature.
Tip: Tip:
Work places that are
marked with “*” already have
measurement data. In this case,
you will firstly get to the overview
of the respective work place
(please refer to 6.2,
„Measurement result overview“).
Evaluation
The coloured evaluation bars positioned under the
measurement result provide information as to whether the measured values are
within the defined limits. The set values show the optimum value. Moreover, the
evaluation is represented by
, or . The settings for the set values and the
evaluation limits can be set using “BAPPU-Standard” software (9.7 „Defining the
type (defining the type of work place)“)
page 20
comp a c t manual
status 07/2019