Elk BAPPU-evo, Compact Manual

Page: 23 / 51

Multi-measuring device for workplace analysis BAPPU- evo
Saving measured values
To save the measured value, you must press . Following this, the next measuring
range is shown. Information pertaining to the individual measurement areas and the
correct measuring procedure can be taken from the quick start guides.
Hold / freeze readings
While carrying out a measurement, the current measured value can be recordes with
“hold” (F1) for view. Pressing the “hold” key (F1) again will repeat the measurement, by
pressing the keys
or you can switch to the previous or the next measured range.
The held value is saved.
Tip:
Tip:
The background colour of the display always shows
you the current mode (light background = measuring
mode, dark background = save mode).
During the illuminance measurement, the self-timer
function can be activated by pressing “hold”. The “hold”
button activates a countdown that shows the time until
the measurement value is recorded. When the
measurement is complete, the user can change to the
next measuring range using
. Alternatively, the
measurement can be repeated by pressing “measure”.
At any time during a measurement sequence or detailed
view, you can change to the next or previous measuring
range by simply pressing
or .
Finishing or cancelling a measuring range
You can cancel a measuring range by pressing the “exit”
(F2) button. Following this, you will be prompted to either discard or save the
measured values. Pressing “overview” (F3) will show the measurement result
overview. All measured values will be saved, overwriting the previous measurements.
6.2. Measurement result overview
After carrying out a measurement sequence, you are presented with an overview of
the measurement data that has been saved. The grey background indicates that the
data is being read from the memory.
page 21
comp a c t manual
status 07/2019