70
Omega 2
EFFECT SCREEN
TO TEST AN EFFECT:
Press
Until the cursor moves to, and highlights the Test Window.
Press
'Yes' is highlighted in the Test window.
Press
The Stage display screen is now active.
Channels addressed in the Effect will display in purple.
Enter:
Mstr
Select:
®
Chase
¬
Effect Name
Time
Chan Test
Bounce
Rate or Sub
Random
1
S 24
50
YES
Single
〉
11 AT 60
Press
The cursor jumps down to the Effect Record Window and moves to
the right to highlight the Test Window.
Press
The Test Window indicates the Test is complete, and
turns off the test.
This sequence requires seven key strokes to stop an Effect in the
Test mode. A macro can duplicate a common sequence for
quick access to special features.
TO STOP THE TEST AT ANY POINT:
Press
The Effect Screen is displayed.
Enter:
Mstr
Select:
®
Chase
¬
Effect
Name
Time
Chan Test
Bounce
Rate or Sub
Random
1
S 24
50
NO
Single
〉
11 AT 60
CHASE ATTRIBUTES
The test completed ran on the default attribute. To select or
address the attributes of the Effect, use the [SELECT] key when the
cursor is positioned in the Effect Record Window.
Use the [JUMP] key to position the cursor in the Test position of
the Effect Record Window. Attributes appear in the lower right of the
Record Window. Attributes determine the relationship of the steps
by patterns. The patterns are detailed below:
Chase:
Traditional loop Effect that steps from beginning to
end, and repeats beginning to end.
Bounce:
A simple back and forth loop that steps a pattern from
beginning to end, and end to beginning.
Random:
A non-patterned Effect with random output where
the step pattern is unpredictable.
Single:
A pattern that steps through the steps only once.
The [SELECT] key will loop through the attributes list and repeat
each time the key is pressed.
Follow the procedures indicated to change the attributes of an
Effect. Before starting the procedures, delete the Master Channel 50
and Sub 24 as control devices. To delete these aforementioned
entries, press [ENTER] while in that position in the Effect Record
Window.
Chase Attributes
Enter:
Mstr
Select: Chase
←
Effect Name
Time
Chan Test
Bounce
←
Rate or Sub
Random
←
1
S 24
50
NO
®
Single
¬
Enter:
Mstr
Select: Chase
Effect Name
Time
Chan Test
®
Bounce
¬
Rate or Sub
→
Random
←
1
S 24
50
NO
→
Single
Enter:
Mstr
Select:
®
Chase
¬
Effect
Name
Time
Chan Test
Bounce
Rate or Sub
Random
1
S 24
50
NO
Single
Enter:
Mstr
Select: Chase
Effect
Name
Time Chan Test
→
Bounce
←
Rate or Sub
®
Random
¬
1
S 24 50
O
→
Single
T 60
Summary of Contents for Omega 2
Page 94: ...94 Omega 2 NOTES ...
