Electronics Diversified Omega 2 User Manual Download Page 35

Page: 35 / 95

Omega 2

STAGE SCREEN

If the lighting plot is complete and all lighting fixtures are hung and

focused, the screen can be customized to only display green channels

where the fixtures are plugged and focused. This feature allows all

channels not involved in the plot to be de-emphasized by turning the

channel color to a gray (inactive) number.

To customize the screen, follow the steps below. All keystrokes are

set from the keypads on the Omega 2 Control Console.

SETTING BLANK CHANNELS

TO SET THE CHANNELS TO BLANK:

Press

The cursor will be positioned on the System menu.

Press

The System menu will be displayed.

Press

The cursor will be positioned on Set Channels

to Blank.

Enter:

〉

SETUP

Version 1.22

Grandmaster FL

9:01:00

SYSTEM

1> Return to main menu

Set channels to blank

3> Display name and link in TRACK . . . . . . . .

Yes

4> Levels shown in hex . . . . . . . . . . . . . . . . .

5> Recording in fast mode . . . . . . . . . . . . . .

Yes

6> Goto Cue aborts all fades . . . . . . . . . . . . .

Yes

7> Flash lower intensity . . . . . . . . . . . . . . . . .

8> Flash upper intensity . . . . . . . . . . . . . . . . .

9> Flashing rate . . . . . . . . . . . . . . . . . . . . . .

10> Number of dimmers . . . . . . . . . . . . . . . .

512

11> Number of channels . . . . . . . . . . . . . . . . .

12> Title in Stage Screen . . . . . . . . . . . . Omega 2

13> Time for Go to Cues . . . . . . . . . . . . . . . .

14> Total units . . . . . . . . . . . . . . . . . . . . . .

265

TO DELETE A CHANNEL NUMBER FROM THE BLANK
CHANNELS LIST:

Press

then press the channel number. The number appears on

the Command Line.

Press

The channel number is removed from the display

screen.

Numbers can only be removed one channel at a time.

WHEN COMPLETE, RETURN TO THE STAGE SCREEN:

Press

The Stage Screen will appear on the monitor.

Press

The Command Line will prompt 'Are You Sure?'

Press

again. The Blank Channels screen will appear.

ADD A CHANNEL NUMBER TO THE BLANK CHANNELS LIST:

Press

The number 5 appears on the Command Line.

Press

The number 5 now appears on the display screen.

Numbers can only be entered one channel at a time. The channel

number will still be visible on the Stage Screen, but will be

displayed in gray.

Chn
5

Enter:
Insert or
delete:

〉

INSERT 5

BLANK CHANNELS

Grandmaster FL

9:01:00

Summary of Contents for Omega 2
































































































Search results

Summary of Contents for Omega 2

Reviews:

Related manuals for Omega 2

Brands by name

Popular brands

Electronics Diversified Omega 2, User Manual

Search results

Summary of Contents for Omega 2

Reviews:

Related manuals for Omega 2

Brands by name

Popular brands