94
2
13
/
16
"
1
15
/
16
"
3"
Wallboard
Studwall
2
1
/
8
"
9
/
32
"
Cooktop/
Range
1
/
4
" min.
3
/
4
" max.
backsplash
thickness
Vent unit
Motor cover
Downdraft Vent
E36DD75ESS
Installation Specifications
•
Voltage Rating – 120V / 60 Hz / 15 Amps
•
Connected Load (kW Rating) @ 120 Volts = 1.0 kW
(For use on adequately wired 120V, dedicated circuit
having 2-wire service with a separate ground wire.
Appliance must be grounded for safe operation.)
•
Amps @ 120 Volts = 8.0 Amps
•
Do not use same circuit as cooktop.
•
Always consult local and national electric codes.
Check local building codes for installation requirements,
as they may vary per locale.
•
Vent must be installed in vertical orientation only.
•
Vent unit outside of building only.
•
Exhaust Duct Required – 3-1/4" x 10"
(3-1/4" x 10" to
round transition duct will be needed)
•
Do not use flexible duct. Round duct instead of rectangular
duct recommended, especially when elbows are required.
•
When multiple elbows are necessary, ensure a minimum
of 24" of straight duct between any two elbows.
•
Thermal breaks such as short section of nonmetallic duct,
should be used in areas of extreme cold.
•
For most efficient airflow exhaust, use a straight run or
as few elbows as possible.
•
Cold weather installations should have additional backdraft
damper installed.
Remote Exhaust Blower
•
1,600 CFM Remote Exhaust Blower (PN # 5304444802)
included with vent – shipped in separate box.
•
Installation Options – roof or exterior wall mount for
against-wall vent installation and under-floor mount for
island vent installation.
Combination Installations
For installation details refer to Project Planning Section.
•
Installing a Downdraft Vent in combination with any gas
cooking surface will affect optimum burner efficiency.
•
Downdraft Vents can NOT be used in combination with
any cooktop backsplash.
•
Downdraft Vent model E36DD75ESS is approved
to be used in combination with Electrolux ICON
®
Cooktop
models E36EC65ESS, E36EC70FSS, E36IC75FSS,
E36IC80ISS, E36GC70FSS, E36GC65ESS, E36EC75DSS,
E36EC75ESS, E36EC75HSS, E36GC75DSS,
E36GC75ESS, E36GC75GSS, E36GC76EPS and
E36GC76GPS.
(For detailed countertop preparation,
refer to Drop-In and Slide-In Cooktop / Downdraft
Vent Countertop Preparation pages.)
•
Proper combination installation of Electrolux ICON
®
Downdraft Vent model E36DD75ESS and approved
36" Gas Slide-In Cooktop will require cooktop power cord
to be relocated to underside of unit.
(For details, refer to
30" & 36" Gas Slide-In Cooktop Power Cord Relocation
Instructions page or on the web at electroluxicon.com.)
planning
information
For 36" model:
E36DD75ESS
Note:
For planning
purposes only. Refer
to Product Installation
Guide on the web at
electroluxicon.com for
detailed instructions.
Specifications subject
to change.
cooking
Downdraft Vents
Summary of Contents for ICON Professional E30DF74GPS
Page 1: ...design guide ...
Page 4: ...4 ...
