57
electroluxicon.com
23
5
/
8
"min.
24"max.
4
1
/
2
" min.
required
distance
to floor
9
7
/
8
" min.
10
1
/
4
"max.
28
1
/
2
" min.
28
3
/
4
" max.
Full plywood
base required to
support 100 lbs.
Stand-Alone Installation
Custom
Panel Specifications
Height
Width Thickness
11
1
/
4
"
30"
1
/
2
"min.
Mounting
panel
Custom
panel
Overall depth with
drawer fully extended
(excluding custom panel
and handle) – 41
1
/
2
"
Note:
Refer to web
for detailed custom
panel construction and
installation instructions.
7
/
8
"
29"
10
3
/
4
"
Power cord
location (right
center rear)
23
3
/
8
" (not including
custom panel)
Mounting
panel
Warmer Drawer/
Single Wall Oven
Combination Installation
*Critical dimension –
MUST be applied
**Electrical junction
box for Wall Oven
must be lower than
the Warmer Drawer
cutout
†
Maximum height
depends on critical
dimension (11
5
/
8
")
3"
max.**
Electrical
junction box
location
28
1
/
2
"min.
28
3
/
4
"max.
Bottom
of oven
cutout
11
5
/
8
"
min.*
24"*
(critical
dimension)
30"min.
4" x 4" opening
to route armored cable
Two 3" wide
x
3
/
4
" thick
planks must be
installed, capable
of supporting
200 lbs.
9
7
/
8
" min.
10
1
/
4
"max.
1
1
/
2
"min.
1
3
/
4
"
min.
†
28
1
/
2
"
min.
28
7
/
8
"
max.
Custom front panel with
custom handle
(not included)
Optional
Accessories
ServeWare
PN # 5304447729
Warmer Drawer / Wall Oven
Combination Specifications
•
To support Wall Oven when using in combination with
Warmer Drawer, two 3"-wide x 3/4" thick planks must
be installed as a base, capable of supporting 200 Lbs.
Do NOT use full base, since planks are necessary to
allow for proper air displacement.
Combination Installations
•
Warmer Drawer can be used alone, or is approved to
be used in combination with any Electrolux ICON
®
Wall
Oven.
(Refer to Combination Installation Specifications
and drawing on this page.)
•
Warmer Drawer is approved to be used in combination
with any Electrolux ICON
®
High-Speed Oven / Built-In
Microwave and / or Electric Single Wall Oven.
(Refer to
model-specific Combination Installation Specifications
pages in Project Planning Section.)
Installation Specifications
•
Product Weight – 41 Lbs.
•
Voltage Rating – 120V / 450W / 60 Hz / 15 Amps
•
Connected Load (kW Rating) @ 120 Volts = 0.45 kW
(For use on adequately wired 120V, dedicated circuit
having 2-wire service with a separate ground wire.
Appliance must be grounded for safe operation.)
•
Amps @ 120V = 3.75 Amps
•
Full plywood base required, capable of supporting
100 Lbs.
•
Base must be level and cabinet front must be square.
Custom Panel Specifications
•
Handle not included, match to custom cabinetry.
•
Panel Dimensions – 11-1/4" H x 30" W x 1/2" min. D
•
Refer to web for detailed custom panel construction
and installation instructions.
planning
information
For model:
E30WD75GTT
Note:
For planning
purposes only. Refer
to Product Installation
Guide on the web at
electroluxicon.com for
detailed instructions.
Specifications subject
to change.
Warmer Drawers
Summary of Contents for ICON Professional E30DF74GPS
Page 1: ...design guide ...
Page 4: ...4 ...
