113
electroluxicon.com
Installation Specifications
•
Product Weight – 338 Lbs.
•
An electrical supply with grounded three-prong receptacle
is required. The power supply circuit must be installed
in accordance with current edition of National Electrical
Code (NFPA 70) and local codes & ordinances.
•
Voltage Rating – 120V / 60 Hz / 15 or 20 Amps
•
Connected Load (kW Rating) @ 120 Volts = 1.02 kW
•
Amps @ 120 Volts = 8.5 Amps
•
Always consult local and national electric & plumbing
codes.
•
Floor should be level surface of hard material, capable
of supporting fully loaded refrigerator.
•
When installing refrigerator adjacent to wall, cabinet
or other appliance that extends beyond front edge of unit,
20" minimum clearance recommended to allow for
optimum 120° to 180° door swing, providing complete
drawer
/
crisper access and removal.
(Absolute 4-1/2"
minimum clearance will ONLY allow for 90° door swing which
will provide drawer / crisper access with restricted removal.)
•
To ensure optimum performance, avoid installing in
direct sunlight or close proximity to range, dishwasher
or other heat source.
•
For proper ventilation, front grille MUST remain
unobstructed.
•
Recess electrical outlet when possible.
•
Water recess on rear wall recommended to prevent
water line damage.
•
Water Pressure – Cold water line must provide between
30 and 100 pounds per square inch (psi).
•
Copper tubing with 1/4" O.D. recommended for water
supply line with length equal to distance from rear of unit
to household water supply line plus 7 additional feet.
Optional Water Supply Installation Kits available.
•
Adjustable front rollers to assist with door alignment.
“Built-In Look” Specifications
•
For built-in look, minimum cutout opening of 70-1/4" H x
36" W x 25" D required to allow for ease of installation,
proper air circulation, and plumbing / electrical connections.
Optional Trim Kit Specifications
For installation details refer to Project Planning Section.
•
If optional Collar Kit (PN # ECK23CDS) is to be used,
different cutout dimensions are required.
(Refer to Collar
Kit ECK23CDS Installation Specifications page.)
•
If optional Louvered Trim Kit (PN # 241723001) is to be used,
different cutout dimensions are required.
(Refer to Louvered
Trim Kit 241723001 Installation Specifications page.)
•
Remove all wall / floor molding prior to installation.
Optional
Accessories
Collar Kit
PN # ECK23CDS
Includes side and
top trim pieces.
Louvered Trim Kit
PN # 241723001
Includes 5" louvered
top grille, side and
top trim pieces.
PureAdvantage
®
Water Filter Replacement
Cartridge
PN # EWF01
PureAdvantage
®
Air Filter Replacement
Cartridge
PN # EAFCBF
Professional Counterdepth Refrigerator
(23 cu. ft. French Dr./Bottom Mount)
E23BC78IPS
planning
information
For models:
E23BC78IPS
E23BC78ISS
E23BC68JPS
E23BC68JSS
Note:
For planning
purposes only. Refer
to Product Installation
Guide on the web at
electroluxicon.com for
detailed instructions.
Specifications subject
to change.
Installation drawing shown
with professional series model
(E23BC78IPS).
Counter-Depth French Door Refrigerators
Summary of Contents for ICON Professional E30DF74GPS
Page 1: ...design guide ...
Page 4: ...4 ...
